Due to its excellent properties, elastomer plastics have been widely used in automobiles, medicine, toys and other industries in recent years. The price of high-performance elastomers can also be described as expensive. Therefore, the residual materials and defective products produced in the molding of elastomers should be recycled as much as possible under the premise of practicability.
However, the production manager is in trouble:
if it can't be smashed, how can it be recycled?
It can be seen that the elastomer material needs to be crushed, which can be achieved.
It is only different from the characteristics of ordinary engineering plastics. If the ordinary pulverizer is used to pulverize blindly, there will be various problems such as sticking to the knife, agglomeration, and no cutting.
The following are several different soft rubber crushing effects, you can click the link to enter Youku to view the full working video:
The car weather strip is smashed to 4mm""
EVA foam is crushed to 10mm >> >>
The TPU nozzle is crushed to 8mm》》
Silicone Crushing Video》》
The equipment used for the crushing of elastomers and soft rubber materials should meet the following functions:
1. It can continuously crush elastomers, plastics, including TPR, TPE, TPU, PU, EVA, etc. for a long time;
2. The smallest can be crushed to fine particles below 2mm;
3. Continuous crushing without agglomeration, without sticking to the knife, high efficiency and stability.
Although we call it an elastomer shredder.
In fact, it can also be used for the crushing of other engineering plastics, and has better wear resistance and higher crushing efficiency.
