| Industry | how to apply mold cleaning machine to injection molding machine industry! | |
|
Release time:2020/1/12 19:52:32 The number of clicks:100
How to apply mold cleaning machine to injection molding machine industry!
Pulse waterway cleaning machine:
The so-called pulse refers to the intermittent shock wave. The principle of the pulse mold cleaning machine is to inject the cleaning liquid and gas into the mold waterway in stages, under the action of the pressure gas, the medium cleaning liquid produces an airburst effect, and the scale and water rust in the waterway are violently washed away to achieve the purpose of dredging and expanding the diameter, thereby restoring the original caliber of the mold waterway and increasing the flow rate of hot water. Why do mold waterways need to be cleaned? 1. After running a heating period, the mold waterway will deposit 1-1.5 mm thick scale and water rust, and correspondingly reduce the temperature in the waterway by 3-6 degrees, and the area with poor water quality will be more serious. 2. If the pipeline cannot be effectively cleaned for a long time, the water flow rate is reduced, the flow rate becomes slower, and the mold temperature is significantly reduced; 3. What is more serious is that it will cause water path embolism and cannot be dredged, resulting in permanent failure of the mold waterway and irreversibility. Therefore, the mold waterway generally needs to be cleaned once every six months to ensure the normal operation of the mold waterway system.
Clean the required equipment
1, an air compressor, in view of the cleaning work requires a large amount of compressed air, it is recommended to use 4HP35 liters of air pump, this specification of the air pump boost fast, large air storage capacity, can avoid the air compressor frequent start to shorten its service life. 2. CNC automatic frequency conversion pulse mold waterway cleaning machine: the main equipment for cleaning can combine gas and liquid and work under the control of the microcomputer controller. 3. Connect four pipes: pulse output pipe, intake pipe, inlet pipe, sewage pipe. 4. A variety of specifications of the interface: suitable for different water separator connection caliber. 5, sewage buffer device: using this device on the one hand can buffer the pressure to avoid pollution of the environment due to splashing, on the other hand, it can precipitate scale impurities for customers to check the cleaning effect.
模具水路清洗机的选型
1, the running time of the mold waterway cleaning machine Each mold waterway cleaning machine is not the same continuous running time, can be selected according to the specific needs of customers.
2, hot and cold water mold waterway cleaning machine depending on the needs of the occasion, can also be divided into hot water and cold water type. Usually most of the market is cold water type, if you use hot water to be specially stated 3, the nozzle of different types of nozzles can form a different cleaning effect, customers need to be their own practical application. 4, business in the selection of business is also very important. Because different merchants can provide goods and services are not the same. |
中文CN
Service hotline：
137-7631-9563
