|
Release time: 2019/6/18 13:02:19 The number of clicks: 2020
Technical | the maintenance knowledge of the shredder tool
Only good maintenance of the shredder blade can make it last a long time and make it more comfortable for users.
Let's talk about the maintenance method of the blade of the crusher:
1. Before the maintenance of the pulverizer tool, it must be determined to cut off the power supply and operate in strict accordance with the operating procedures.
2. Before each boot, first manually idle to see if the blade is knifed and confirm that the blade is installed firmly.
3. In the process of use, the materials are sorted, and the soft and hard materials should be pulverized with different tool structures.
4, do not put in metals, stones and other hard materials, this is the nemesis of the knife.
5. Regularly check the wear degree of the blade of the crusher, and replace the serious one in time, and report the spare parts to supplement.
6. Regularly check the fixing screws, tool clearance, sharpness of the blade, and ensure that it works reliably.
7. 10 minutes before work every day, spray anti-rust oil on the shredding chamber knives to keep them bright.
8. It is strictly forbidden for non-designated personnel to operate the equipment, and it is usually necessary to stop people from the machine.
What are the more commonly used tool materials in the current shredder?
|
1. Imported Japanese material models: SKH-2, SKH-51, D2, CD53, SKD-11
2, the United States material model: LD, H13.
3. Domestic material models: YG8, YG15, W6Mo5Cr4V2, Cr12MoV. 6CrW2Si
|
|
Which material is good?
Various materials have their own advantages, only different materials to choose different tool materials to achieve the best results.
If you do not know how to choose, you can consult Gu'an business, with rich technical experience of Gu'an engineering personnel, will be based on the material, size, thickness of the crushed material, to be crushed to achieve the requirements, particle size, production capacity, tool structure and other factors to select the material of the tool and the structure of the tool holder, rather than using a crusher to sell all users.
|
|
According to the thickness of different plates; The material then determines the HARDNESS OF THE HRC. So that the blade to achieve the highest utilization value, work without bursting edge, do not roll the edge, durable. Good wear resistance, with high strength toughness and other advantages.
The tool in the crushing process, play the most important factor, if the knife has damage or discomfort, to deal with in time, otherwise the machine operation will appear a series of chain reaction discomfort, the belt will slip, the motor heat, overload will trip, the bearing will be abnormal, the characteristics of the crushing material will also change and other adverse reactions, so the user should pay special attention.
The shredder tool is customized to find Gu'an machinery
The shredder screen is customized to find Gu'an Machinery
|
|
