Rubber Crusher Fluorine Rubber Latex Rubber Crude Rubber Crushing

Fluoroelastomer crusher Vinyl rubber shredder Milk rubber shredder Raw rubber shredder
Fluoroelastomer has the following characteristics, the crushing requirements are relatively high, ordinary crusher crushing is very easy to change the material characteristics.
Fluoroelastomer characteristics
Good stability: Fluoroelastomer has a high degree of chemical stability, is currently all elastomers of the media resistance is one of the better.
High temperature resistance: The high temperature resistance of fluoroelastomer is the same as that of silicone rubber, which can be said to be the better in the current elastomer.
Aging resistance: Fluoroelastomer has excellent weather aging resistance and ozone resistance.
Vacuum performance: With excellent vacuum performance.
Mechanical properties: Fluoroelastomer has excellent physical and mechanical properties.
Electrical properties: the electrical properties are better, the moisture absorption is lower than other elastomers, and it can be used as a better electrical insulation material.
Small air permeability: The solubility of fluoroelastomer to the gas is relatively large, but the diffusion rate is relatively small, so the overall performance of the breathability is also small.
Low temperature performance: The low temperature performance of fluoroelastomer is not good, which is due to its own chemical structure.
Radiation resistance: The radiation resistance of fluoroelastomer is one of the poorest in elastomers

Fluorine rubber crusher Elastomer elastomer pulverizer Milk rubber pulverizer Raw rubber pulverizer function:
1. The tool material is made of 2 kinds of steel of different properties: the knife edge part adopts high-speed steel with high hardness, which greatly improves the cutting and crushing capacity of the knife edge (higher than the hardness of SKD-11 material). At the same time as high cutting, it eliminates multiple cutting and friction caused by one cutting is not in place.
2. The knife body adopts steel with low hardness to enhance its toughness, greatly improve the impact resistance of the tool, and ensure the crushing force of large materials.
3. The low temperature design is adopted in the crushing room, so that the material can be crushed in a low temperature environment of 5-20 degrees, so as to avoid adhesion due to the melting of the material due to the increase in temperature. The screen has been specially treated to reduce the falling of materials due to static electricity and ensure smooth unloading.
For more shredding solutions and related technical support, please pay attention to Guan Machinery!