Rubber Mill Tire Rubber Mill Silicone Rubber Mill

Rubber mill tire rubber mill silicone rubber mill is some customers who have higher requirements for crushing effect. Due to the characteristics of low output and high cost price in the plastic grinding process, it is directly abandoned for some customers. Powder is inherently difficult, if it is soft material grinding it is even more difficult, the common problems of users are: capacity, price, agglomeration, stickiness, carbonization, smoke, water cooling, mesh size, etc. It is not ideal. Technical things are actually very simple for professional personnel, but for unprofessional personnel, it is like a mountain. When you find Gu'an Machinery, it means that you have hit the right manufacturer, and Gu'an is you. The technical consultants around you will share years of experience with you. solve your problem.

Rubber Mill Tire Rubber Mill Silicone Rubber Mill

Structural features of Gu'an rubber mill:

1. The special tool is made of alloy steel, which is particularly durable. After the tool is blunt, it can be sharpened many times, and it can be used repeatedly and has a long service life.

2. Water-cooled cutter head, high output, low temperature, avoid carbonization of rubber powder

3. The main body of the machine is made of thick-walled materials, which can avoid long-term use of domestic crushed materials and affect the mechanical properties

4. The gap of the cutter head can be adjusted manually, and the adjustment is convenient

5. The feeding adopts screw forced extrusion feeding, frequency conversion speed regulation, and feeding uniform.

6. Step-down starter box with overload protection function

7. Automatic discharge screening, closed structure, no dust pollution.

You can also choose - disc type plastic grinding powder:

The material enters the cavity from the middle of the grinding plate, and all the materials must pass through the grinding plate before being discharged, so the coarse material after grinding and sieving will enter the grinding plate again for circular grinding until the desired effect is obtained, and the finished product is collected. It is suitable for powder processing of materials with moderate hardness, impact resistance and brittleness, such as PE, PP, PS, ABS, PVC and other materials.
Its main features:

1. The new grinding disc design has higher output, stronger wear resistance and twice the life of ordinary discs;
2. Using newly designed special bearings, high speed is more stable;
3. Easy to install and maintain, easy to clean;
4. The grinding process is completely closed, and there is no dust leakage;
5. Fully automatic, automatic feeding, discharging and sorting;
6. The adjustment of the grinding gap is simple, just use the feeler gauge and adjusting bolt to adjust accurately;
7. The cooling system of the main engine adopts the combination of air and water for cooling.
8. Reasonable design, small cross section of grinding chamber, material will be caught immediately as soon as it enters, ground to be fine, and then quickly removed to avoid material heating and decomposition.
9. The size of the grinding powder can be adjusted, and it can grind 10-120 meshes, which is easy to adjust;
10. This series has disc type and knife grinding type to choose from, please consult our company's professionals for selection;
11. Factors affecting the production capacity are: the size and mesh of the grinding powder, the material of the grinding material; the feed size is 5-8mm;