Knife disc mill, rubber mill

刀盘式磨粉机，橡胶磨粉机Knife disc mill, rubber mill

一、Application areas:

Suitable for soft rubber, elastomer plastics, polyethylene PVC, high and low pressure polyethylene PE, polypropylene PP, random polypropylene PPR, nylon PA, polycarbonate PC, polystyrene PS, butyl styrene, ABS, foamed PE , PVC, SBS, EVA, PPS magnetic card, leather, rubber and other materials powder processing. Widely used in plastic, chemical, resource recycling and other industries

Knife disc mill | Rubber mill is one of the most important equipment in the tire crushing and recycling production line. The common problems of users who have used tire rubber crushing are: production capacity, price, agglomeration, stickiness, carbonization, smoke, water cooling, mesh size, severe tool wear, etc. It is actually very simple for a professional Gu'an technical engineer, but for unprofessional personnel, it is interlaced like a mountain. When you find Gu'an Machinery, it means that you have hit the right manufacturer, and Gu'an is your technical consultant. , to share with you years of experience. solve your problem.

二、 Features:

1. The special tool is made of alloy steel, which is particularly durable. After the tool is blunt, it can be sharpened many times, and it can be used repeatedly and has a long service life.
2. Water-cooled cutter head, high output, low temperature, avoid carbonization of rubber powder
3. The main body of the machine is made of thick-walled materials, which can avoid long-term use of domestic crushed materials and affect the mechanical properties
4. The gap of the cutter head can be adjusted manually, and the adjustment is convenient
5. The feeding adopts screw forced extrusion feeding, frequency conversion speed regulation, and feeding uniform.
6. Step-down starter box with overload protection function
7. Automatic discharge screening, closed structure, no dust pollution.
8. Adopt a new tool structure, which improves the output and enhances the wear resistance of the tool
9. High output, fine grinding, energy saving and environmental protection

10.10. Wide range of application, can grind PVC, PE, PS, PA, PC and other plastics
11. Easy installation and maintenance, open the door cover to clean
12. The whole plastic grinding process is fully sealed, no dust pollution
13. The powder size is adjustable from 10 to 120 mesh, and it is easy to adjust
14. The cooling system of the plastic pulverizer adopts the combination of air and water for cooling

三、working principle：

The materials to be milled first pass through the coarse powder, and then feed from the feeding port into the middle cavity of the grinding disc. All materials must pass through the grinding disc before they can be discharged, so all materials can be completely ground, and the coarse materials after passing through the screen will enter the grinding disc cycle again. Grind until the desired effect is achieved, and the finished product is collected. It is suitable for materials with moderate hardness, impact resistance and brittleness; such as powder processing of PE, PP, PS, ABS, PVC and other materials.

Under the action of the high-speed centrifugal force of the cutter head, it is ground with the tooth plate, the fine powder is filtered and discharged, and the coarse powder continues to be pulverized until it becomes a powder. Suitable for the grinding of soft materials, elastomer materials, heat-sensitive plastics; such as PVC, PE, PS, styrofoam, rubber, leather, plant fibers and other materials, with the characteristics of high output and fine precision

四、technical parameter：